[User Interface and tools available on the platform]
A comprehensive risk scenario can be created through the Exposure Analysis dashboard, which appears on the right side of the screen after pressing the Exposure Analysis button (see figure below). The list of available Exposure Analysis tools depends on the user profile.
The first step is to select the exposed assets to be analyzed from the list of available layers. This list varies depending on the user’s settings, but generally includes:
GHS-Population (2015)
World Population (GPV v4 - 2015)
Health facilities
Dams
Power Plants
Airports
Users may select as many layers as desired.
Once selected, the layers appear highlighted and are loaded and displayed on the platform.
By pressing Next, the following step becomes available: drawing an Area of Interest (AOI) to perform the exposure analysis. After clicking Draw an AOI, the user must left‑click on the map to set the starting point of the polygon. To complete the AOI, the last point must coincide with the first one (i.e., the user must click again on the initial point).
Alternatively, an AOI can be uploaded directly as a shapefile. The shapefile must:
- be formatted in EPSG:4326;
- contain only the first polygon (if multiple are present);
- be compressed into a .zip archive;
- have the shapefile placed at the root level of the archive (not inside subfolders).
The archive can be uploaded by clicking Upload AOI.
It is also possible to save the AOI for future use or sharing as a shapefile compressed in a .zip archive by clicking Save AOI.
AOI type refers to the potential use of flood areas or preload areas to perform the analysis.
Please note that the maximum extent of the AOI is set to 10,000 km².
Users must decide whether to use hazard maps for the analysis. Doing so refines the results by identifying exposures falling within different hazard categories (e.g., low, medium, high).
Once selected, the hazard map appears highlighted, is loaded into the platform, and becomes available in the Layer List along with the previously chosen exposure layers.
Once all selections are made, the user can press Next to view the results of the exposures within the AOI.
A list of the analyzed exposures will appear, and for each layer the system displays related information, such as the number of people and/or specific assets, located in different hazard areas.
The system highlights the position of an asset on the map when the cursor hovers over its name in the list. Results can be downloaded in .xlsx format by clicking Download .xlsx.
If the user is not satisfied with the results, the scenario can be modified by navigating back to any of the previous steps: selecting more or different exposures; drawing or uploading a new AOI; selecting different hazard maps for the analysis.